Our freestanding, rigid, double walled cleanroom was designed and built in accordance with criteria called for in Federal Standard IEST-STD-CC1246D. This document specifies physical room conditions including airflow, temperature,humidity, lighting and most importantly airborn particulate allowable for a given area. Our cleanroom is a hard-walled structure utilizing roof mounted HEPA filters that continually extract and filter the air from the room. The clean, cooled air is blown back into the room and this process continues, sweeping out all airborn particulate matter generated by personnel, materials, and other contributing contaminants. 

The primary level of cleaning we perform is to a Class 100 Level. To establish the criteria required to meet Level 100 cleaning standards, we refer to IEST-STD-CC1246D. We follow the recommendations in this document for cleaning procedures using recommended solvents and other materials called for. We utilize the tables in this document to establish our basic allowable surface particulate criteria.

Our goal is to provide the highest quality Cleanroom products that meet and exceed our customers requirements while complying with Federal and Industrial standards.

The Particle Trap 6000

PT6000 is a source capture system that solves a major problem when blowing off particles in controlled or clean room environments. With the PT6000, you can clean your medical device, optics, packaging materials with confidence while maintaining the integrity of your clean room.

Rear Upturn

Tacky Mat® 800030 

Get maximum protection with the Tacky Mat® 800030 series for foot borne contamination. Each sheet has a strong adhesive coating that removes dirt on contact. The 800030 series provides the most economical way to meet cleanroom needs. The Tacky Mat® 800030 series protects sanitary conditions in cleanroom areas. Each mat consists of 30 disposable sheets. When the top sheet becomes soiled, simply peel off to expose a new, clean surface. Tacky Mat® 800030 installs in seconds and can last up to weeks at a time depending on the amount of traffic. No frame is required; adhesive strips, 800030B or full width backing, 800030BFW, adhere the Tacky Mat® 800030 in place on the floor.  

Pregloving Cleanroom Lotion

Available in 8 oz.


Tacky Roll Mops 6-300

The Tacky Roll Mop Assembly is a disposable 18" adhesive surface which picks up contaminants from hard to reach areas such as walls, ceilings, floors, benchtops, windows and corners. It removes dirt, dust, debris, and lint from glass, plastic, metal, cloth and similar problem surfaces. The top sheet of the tacky roll mop may be peeled off to expose a fresh, clean surface. Perforated every 14%" (avg.) for easy access to fresh sheet. For refill simply pull off the old core and replace it with a new roll. The Tacky Roll Mop has a telescopic 48" handle to achieve a maxi mum reach of over 7 feet. Each Tacky Roll Mop has 20 (avg,) disposable adhesive sheets.

The Particle Trap Mini

PTM is a source capture system that solves a major problem when blowing off particles in controlled or clean room environments. With the Particle Trap Mini, you can clean your medical device, optics, packaging materials with confidence while  maintaining the integrity of your clean room.  The PTM utilizes a filtration system that includes a Pre-Filter and HEPA Filter combination to trap particulates using negative pressure, permanently removing the contaminants from your environment or clean room.  Clean, HEPA filtered air is returned back into the clean room or laboratory, eliminating the need for external ductwork and/or the loss of conditioned air in the facility.

Hand Held Tacky® Roll Mop
A smaller version of the full size tacky roll mop. It's the perfect tool for cleaning work counters, pass thru windows and any other cleanroom areas where fast clean up is needed in confined spaces. Peel off the dirty sheet when a new one is needed and when the roll is finished a new refill slides on easily. Its small size makes it convenient to store and the sheet perforations make it easy to use

The Particle Trap Cube

PT Cube is a source capture tool that solves a major problem related to blowing off particles in manufacturing and clean room environments. Clean your parts with confidence without compromising the integrity of your clean room. 

Moisturizing Hand Cream

A Pre-gloving “Paraben Free” moisturizing Hand Cream formulated for the Medical, Pharmaceutical, Aerospace and Food Processing environments. Contains 4% Dimethicone which helps add a protective layer to the skin. This cream relieves chapping, skin flaking and skin sensitivity caused by Nitrile, Vinyl & Latex gloves. Loaded with 14 Botanicals and Succulents along with Vitamins A, D and E for skin rejuvenation.


Flat Top

MBDCS Station: Medical Blister & Device Cleaning Station

The Static Clean MCS-Medical Cleaning Station is an excellent contamination control tool designed to improve yields by reducing rework.

 Cleaning Systems


This stainless steel closed loop parts cleaning system employs three proven cleaning tools – static neutralization, high velocity compressed air and advanced HEPA filtration. The unit only occupies just over three square FT of of valuable bench space and allows you to clean parts in a clean room with little risk of contaminating the surrounding environment. Its features include Stainless Steel Construction. HEPA filter (99% efficient at 0.3 micron)