Z-Mar Technology, Inc.

9311 Monroe Road

Unit K

Charlotte NC 28270 US

Phone:  800-224-0773, 704-841-8845

Fax: 704-841-8847

​Email: noesd@z-mar.com

Tempest BTI Specifications
Air Flow

Two speed fan (600 FPM, 76 CFM

at 12 in and high-speed fan setting)

Balance

0+10V typical (ambient temperature:

65F to 80F, RH: 15% to 65%)

Heated Air

15F above ambient (fan low, 6in)

8F above ambient (fan high, 12in)

Input Power

AC mains (or equivalent), 120V at

60 Hz, 2A max. (heat on, fan high)

Input Fusing

5A time-delay, 5 x 20 mm cartridge

size (fuseholder in AC inlet)

Ion Emission

AC-coupled floating (self balanced)

high-voltage ionizer circuit with stainless

steel fine ground electrodes

ChassisPowdercoat finish steel enclosure
Weight

7.1 lb (without cord); 8.1 lb shipping

(packaged with cord and manual)

Dimensions

9"H (with stand/frame)

7 1/2" width, overall (6 1/4" width,

stand/frame at base)

Mounting

Benchtop tilt-adjust frame with locking

knobs, black rubber feet; screw

clearance slots in frame base for wall

mounting or shelf mounting

Ozone0.01 ppm


Tempest BTI

The Tempest Ionizing Blower BTI Benchtop Ionizer generates AC high voltage to produce balanced ionized airflow, thereby eliminating static charges on surfaces. The unit can be placed at one end of the workbench, or mounted on wall or shelf, and directed at the work target or area to be neutralized. The ionizer is best positioned 12” to 48” directly in front of the work.

Features Include:

• Compact BenchTop Ionizing blower

• Auto-balanced ionization

• Single-phase mains AC power input

• Integrated HV electrode point cleaner

• Dual fan speed, low conductive emissions

• White powder coat finish

• Built-in switched heater for warmed airflow

• Meets the ANSI/ESD STM3.1 Ionizer Standard

• Adjustable-angle mounting stand, adaptable for benchtop, shelf or  wall location