Z-Mar Technology, Inc.

9311 Monroe Road

Unit K

Charlotte NC 28270 US

Phone:  800-224-0773, 704-841-8845

Fax: 704-841-8847

​Email: noesd@z-mar.com

Snaps

15' Floor Mat Grounding Cord

Snap to Ring Terminal

Part: 793.15

Floor Mat Grounding Cord with Ring Terminal

3/8" Snap

Available in 10' and 15' Cords.​

30202 = 10'

30203 = 15'

WSJ-1

WSJ Ground Block Specifications

Single or Dual ESD ground jack blocks available
Injection molded block
6' Ground wire, standard
Mounting hardware included

Universal Snap Kit
Fast and easy way to install 10mm snaps or studs to soft work station materials. Includes 2 screws (floor and table mat lengths). 1 each: 10mm socket, 10mm stud, washer and screw base.

Install 10mm snaps or studs to ESD work station materials. Includes 2 screws (floor and table mat lengths).
1 each: 10mm socket, 10mm stud, washer and screw base.

Alligator Clip
High quality clip for grounding wrist straps
Connects to a standard banana plug.

30120

Rivet Ground Stud
Fast and easy way to install 10mm snaps or studs to soft work station materials. Includes 10mm stud, washer and rivet base.

Install 10mm studs to ESD work station materials.

10 Snaps Per Bag

15' Multipurpose Common Point Ground Cord

Male 10mm Snap with Dual Banana Jacks 

​Bulldog Clip Available

Part: CP1518, CP1518BD

WSJ-2

15' Multipurpose Common Point Ground Cord

Male 10mm Snap with Dual Banana Jacks to Ring Terminal

Part: CP2522

This simple-to-use tool attaches snaps to static mats. Three easy steps give you a secure snap with good electrical connection. Rugged and rust resistant, the Snap Tool allows you to put a grounding snap right where you need it.  

Ring Terminal Banana Jack
High quality ring terminal terminal that accepts standard banana jack.

The CP4070 Metal Bench Mount Common Point Ground. The metal enclosed box mounts under front edge of workstation.

Includes a 15′ long ground cable with #10 ring terminal connector. Two banana jack receptacles for secure ground connections. Two parking studs (4mm) for storing cords when not in use.
Dual bench ground mount for single wire wrist straps.
Mounts under workbench and can ground two operators.

​Cords & Grounding

Push and Clinch Ground Snaps
Pronged 10mm sockets or 10mm studs. Easily installs onto multi-layer rubber or vinyl. Provides a strong contact for table matting

10mm male studs or female sockets
Perfect for grounding worksurface or floor matting

Snap Adapter Set
The Snap Adapter Set is compatible and interchangeable with all major snap manufactures.

The CS0128-stud connects a 10mm stud to a 10mm stud.

The CS0128-socket connects a 10mm socket to a 10mm socket.

Stacking Snap Adapters
The CS126 series snap adapters from connects a banana jack to an ESD mat. Easily connect a wrist strap, ground cord, or constant monitor and they are well grounding ESD mats on carts. The banana jacks are available with 10mm male stud, 10mm female socket or with both a male and female.

CS126-stud: 10mm Stud
CS126-socket: 10mm Socket
CS126-stud&socket: 10mm Socket and Stud

Snap Screw Set
The CS123 Snap Screw Set provides a 10mm stud in worksurface rubber or vinyl. Includes a screw base and 10mm stud.

Install 10mm studs to ESD work station materials.
1 each: 10mm stud, screw base.

Rivet Ground Socket
Fast and easy way to install 10mm snockets to soft work station materials. Includes one 10mm socket, and rivet base

Install 10mm sockets to ESD work station materials

10 Snaps Per Bag