6800 ESD Chair Mat
Protect ESD painted floors!
6800 ESD Chair Mat is made from an engineered PVC with inherent electrical properties that will last the lifetime of the material.
Like our conductive runners, the homogeneous distribution of carbon black and proprietary polymers give the conductive vinyl chair mat a continuous and permanent path to ground. Electrical properties will not wear due to damage caused by chair casters, so the conductive circuit remains continuous while guarding against scratching and scuff marks.
Chair mats are laser cut specifically for desks and can be punched if one chooses to add a grounding snap.
Maintain 6800 ESD Chair Mat with 4030 Ready-to-Use Neutral Cleaner.
Electrical properties are warranted for the lifetime of the mat
*Electrical properties are warranted for the lifetime of the mat
*Resistance measures 10^3 – 10^6 ohms per ANSI/ESD S7.1-2005
*Compliant to ANSI/ESD S20.20
*Solid single layer is .090" (2.29mm) thickness
*Stippled surface, laser-cut edge
*Low outgassing and low VOC
*UV additives offer color stability
*Made in the USA
To keep vinyl clean and avoid insulative electrical readings, use a neutral cleaner such as 4030 Neutral Cleaner ready-to-useformula. The low alcohol, high surfactant formula will clean deeply without damaging the structural integrity of the conductive material. Runners can be cut easily with a utility knife.
Product #6800 = 46" x 50" Black chair mat
9311 Monroe Road
Charlotte NC 28270 US
Phone: 800-224-0773, 704-841-8845
Z-Mar Technology, Inc.